Every item here starts from a problem it can answer, and from the case where it is not the answer. No shop and no price list: we measure first.
Split air conditioners
We rule out a dirty coil, a blocked filter and a leak first. If a repair no longer makes sense for the age and condition of the unit, we show you the comparison and you decide.
Not for a whole metal shed: more units in a building that keeps gaining heat can raise the bill and change little where people stand.
Floor-standing air conditioners
We measure across the room first, because a far corner that stays warm is often an airflow or a placement problem. A floor-standing unit makes sense when the room is large and open, with floor space and a route for the pipes.
Not when the existing unit is simply dirty or short of airflow, and not where the building leaves no route for the pipes and the outdoor unit.
Ducted AC and fan coil units
We measure the air in and out and the airflow. In many Dubai buildings you have no compressor of your own: a fan coil takes chilled water from the building, so we tell you whether the fault is yours or the building’s.
Not if the fault is a blocked filter, a dirty coil or the building’s chilled water supply. Those get repaired or reported.
Ventilation and extract fans
We check what the existing fans really pull and where the heat or moisture starts. In a workshop, extracting heat above machines and ovens can do more than adding AC units.
Moving air will not save a product that needs a cold chain, and it will not cool a shed whose roof keeps heating it.
Portable air conditioners
For a room where nothing may be fixed to the wall, or for a short spell while a repair waits. It needs a window or an opening for its hot-air hose, so we check that first.
It is not a dehumidifier, and it will not cool a whole home. Without an outlet for its hot air it only moves the heat around the room.
Window air conditioners
Where a room already has an opening made for one. We check first whether the old unit can be cleaned or repaired, then what fits the opening.
Not where the building does not allow it or there is no opening. Cutting a new one is building work, not a cooling fix.
Portable dehumidifiers
It goes into the estimate only when the cause cannot be removed. Readings before and after show whether it does the job.
Not first. A blocked drain or a weak extract fan gets fixed before anyone buys a machine.
Ducts and diffusers
We look first, through an access panel or with a camera in the duct, and you see the same picture we do.
New grilles and clean ducts will not fix damp. If there is mould on the ducts, the moisture comes first.
Ducted ceiling dehumidifiers
When readings show humidity staying high room after room, and the ceiling has the space and a drain for it.
Not when moisture comes through the building itself, such as failed roof or wall waterproofing. That is a building repair.
Cold rooms and freezer rooms
Sized from how you load it: how much warm product goes in at once, how often the door opens and how hot it is around the room.
It holds temperature: it will not rescue product that arrives warm or is already spoiled. A store holding food may also need approval before it is built, from Dubai Municipality in Dubai or ADAFSA in Abu Dhabi. That approval is in your business’s name and we do not promise the outcome.
Refrigeration units
We find the fault with measurements, not by replacing parts until it works. When a unit is not worth repairing, you see both options with their costs.
Many units are worth repairing. A new one comes up only when age, parts or repeated failures say so.
Temperature and humidity sensors
Placed where the problem showed: by the doors, at the top of the racks, in a home left empty, so the readings can be checked without opening the door.
A sensor tells you there is a problem. It does not remove the cause.
Air curtains
We note which doors must stay open and log conditions beside them through ordinary working days.
It deals with the air at the door. It will not cool upper racks or dry a damp wall.
Equipment is supplied by OBLACHKO GENERAL TRADING L.L.C, our trading company.
Installation and servicing are carried out by a licensed contractor.
Photos and drawings show the type of equipment, not a specific model or make.
The same four steps, for a one-bedroom apartment or a warehouse.
You get: the readings.
You get: an itemised estimate. You decide.
First clean, adjust, repair. New equipment last.
You keep: the sheet, before and after.
Before the work and after it we take the same readings in the same places, and note the time and the weather outside. You keep the sheet, so you can see what changed without taking anyone’s word for it.
| Before | After | |
|---|---|---|
| Date and time | ||
| Outdoors at the time°C, % | ||
| Relative humidity% | ||
| Temperature°C | ||
| Air speed at the outletm/s | ||
| NoisedB(A) |
Sample layout. Your readings are filled in on site.
Leave your number and a few words about the problem. We will call back the same working day and arrange a visit to take measurements.
Office 501-3001, Rigga Business Centre, Al Murqabat, Dubai. Equipment is sold under Dubai trade licence No. 1587140.
